(LAW2) LiniArc® Wet Location – Sign Lighter

Architectural Grade Sealed (IP66) & Rotatable Linear

With its clean aesthetics and unparalleled performance, the LiniArc® Wet Location (LAW2) extends interior linear runs to the outdoors – now with sign lighter capabilities.

Secured by two adjustable mounting segments, these mounting styles feature full 360-degree rotation for accurate aiming.

Common applications include but are not limited to, entryways, flat and three dimensional signage displays, window graphics, and wall murals.

LiniArc® Wet Location is proudly Made in the USA and meets BAA and BABAA Compliance.

360-Degree Rotation Using Rotatable Mounting Points
Efficient & Powerful Illumination
- Up to 128 LPW and 1,500 Lumens/ft.
Factory-Sealed, Weather-Ready Design
- Factory-sealed IP66 protection resists dust, moisture, and corrosion
  and performs from –40°F to 122°F.
Clean, Linear Form Factor
- 2″ Width Housing, Standard Lengths from 1′ to 8′
Made in the USA
- Meets BAA and BABAA requirements.

Rotatable Arm Mount Lengths: 3″ / 6″ / 12″ / 18″ / 24″
Rotatable Top Stem Lengths: 12″ / 24″ / 36″ / 48″ / 60″

Specification

Construction
• Factory-sealed, IP66 rated for Outdoor and Indoor applications
• DuraGrip®polyester powder coat finish. DuraGrip withstands extreme weather changes without cracking or peeling. Other standard LSI finishes available
• 1ft. to 8ft. length in 1ft. increments, 2” nominal width, 3” height (direct), 4” height (direct/indirect)
• Extruded Aluminum housing for Corrosion Resistance
• Flush mount Acrylic or High-Impact Polycarbonate lens
• Operating temperature: -40°F to +122°F (-40°C to 50°C)
• Post-painted for high quality finish Optical System
• Symmetric, Asymmetric (forward or reverse) or Narrow beam distributions
• Diffused lens avoids direct view of LED chips and pixellation
• Use luminaire aiming to optimize illuminance levels
• Minimum color rendering index (CRI) of 80 for accurate color rendering. 90CRI option for vivid, true to life color rendering
Electrical
• High-performance class 2 driver features overvoltage, under-voltage, short-circuit and over-temperature protection
• Universal Input Voltage (120-277VAC) or 347VAC
• 0-10V dimming (1% - 100% DIM to OFF) standard. Compatible with most commercially available dimmers.
• L70 Calculated Life: >60k hours
• Power factor: > 0.90
• Total harmonic distortion: <20%
• Integral cold weather (7W) or standard
(10W) emergency battery.
Controls
• Available with Integral AirLink Blue (ALB) controls
• ALB is a low-power wireless Bluetooth mesh control system. ALB provides significant energy savings while ensuring code compliance and security.”
Installation
• Rotatable Arm (Wall) or Stem (Ceiling) Mount
• Arm and Stem packaged with fixture (light assembly required)
• See installation guide for details.
Warranty
• LSI luminaires carry a 5-year limited warranty. Refer to https://www.lsicorp.com/resources/terms-conditionswarranty/ for more information.
Listings
• Certified to UL 1598 and UL 8750.
• Suitable for dry, damp, or wet locations.
• IP66 Ingress Protection Rating
• IK10 Impact Rating using Polycarbonate lens
• IK7-8 Impact Rating using Acrylic lens
• IDA compliant; with 3000K or lower color temperature selection. Only in specific lumiunaire orientations without uplight.
• Title 24 Compliant; see local ordinances for qualification information.
• Meets Buy American Act (BAA) and Build America, Buy America (BABA) requirements