Barrier Decoupler - Vinyl noise barrier with closed cell foam decoupler

SECTION 13 48 13

PVC Barrier Decoupler

PART 1 GENERAL

1. SECTION INCLUDES
   1. PVC Barrier Decoupler
2. REFERENCES
   1. International Code Council (ICC)
      1. ICC IBC: International Building Code
   2. Underwriters Laboratories (UL)
      1. UL 94: Standard for Tests for Flammability of Plastic Materials
3. SUBMITTALS
   1. Product Data: Manufacturer’s data sheet and installation instructions.
   2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified product.
   3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
4. QUALITY ASSURANCE
   1. Qualifications:
      1. Manufacturers: Provide acoustical product from a single manufacturer.
      2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
   2. Performance Requirements:
      1. Surface Burning Characteristics: Acoustical product to perform as specified when tested in accordance with UL 94. Acoustical products surface burning performance should comply with the International Building Code and other local building code requirements.
5. DELIVERY, STORAGE, AND HANDLING
   1. Storage and Handling Requirements:
      1. Handle products carefully to avoid any damage.
      2. Store products indoors in a clean, cool, dry place, and out of direct sunlight.
      3. Store products in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
6. SITE CONDITIONS
   1. Ambient Conditions:
      1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
      2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
   2. Existing Conditions: Do not install products until space is enclosed and weather proofed, and wet work is completely dry.
7. WARRANTY
   1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

PART 2 PRODUCTS

1. MANUFACTURERS
   1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
      Phone: 952-448-5300. Fax: 952-448-2613. Website: www.acousticalsurfaces.com
2. DESCRIPTION
   1. Product: Barrier Decoupler by Acoustical Surfaces, Inc.
   2. Product Options:
      1. Composition: Mass loaded vinyl noise barrier with closed-cell PVC decoupler
      2. Thickness: 3/8”
      3. Size: 54” width x 20’ long roll
      4. Finish: Black
      5. Mounting Method: Mechanical Fasteners
   3. Product Performance:
      1. Surface Burning Performance
         1. Fire Rating per UL 94: HFTI Class C.
   4. ACCESSORIES
   5. Attachment hardware for noise barrier as specified by manufacturer for installation.

PART 3 EXECUTION

1. EXAMINATION
   1. Verification of Conditions:
      1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.
      2. All wet work in the installation area must be complete, cured, and dry prior to installation.
2. INSTALLATION
3. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
4. PROTECTION
5. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

END OF SECTION

Keywords:
sound isolation barrier
vibration decoupling
noise transmission control
soundproof construction layer
soundproof drywall backer
retrofit soundproofing
wall soundproofing
soundproofing pipe wrap
drain line soundproofing
automotive soundproofing
soundproof under layer
mass loaded vinyl barrier
Barrier Decoupler PVC sound barrier
high-density vinyl sound barrier
closed-cell PVC foam decoupler
blocks airborne noise transmission
reduces vibration transfer between surfaces
STC rating 27 acoustic barrier
thermal insulation barrier layer
durable moisture-resistant sound barrier
mold and mildew resistant acoustic barrier
UL 94-HFTI Class C fire-rated barrier
eco-conscious PVC soundproofing material
environmentally considerate PVC materials
energy-efficient thermal barrier
safe and reliable building material compliance
recyclable PVC acoustic barrier
noise control for walls, ceilings, and floors
soundproofing HVAC ducts
soundproofing machinery and equipment enclosures
acoustic barrier for PVC waste pipes
automotive noise control barrier
ceiling tile backer for soundproofing
floor underlayment for carpet soundproofing
mechanical fastener installation (staples/screws)
lay flat installation on horizontal surfaces
54-inch wide x 20-foot roll format
1 lb per square foot vinyl barrier
1/4-inch closed-cell PVC foam backer
3/8-inch total thickness sound barrier
cuttable with sharp blade or scissors
black vinyl with grey foam decoupler
retrofit barrier decoupler for wall soundproofing
PVC foam decoupler for vibration isolation
mass loaded vinyl barrier with foam backer
closed-cell PVC sound barrier for HVAC ducts
automotive barrier decoupler for noise reduction
drain line soundproofing with PVC decoupler
thermal and acoustic barrier for retrofit projects
moisture-resistant PVC soundproofing underlayment
fire-rated acoustic barrier for commercial buildings
energy-efficient PVC barrier for sustainable construction