Veröffentlichen Sie Ihre Produkte
Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

Google-Übersetzung,

Acousti-Board Ultra™ Schalldichte Rückseite
Eine nachhaltige Trockenbau-Trägerplatte aus Naturfasern

Acousti-Board Ultra™ ist eine kostengünstige und nachhaltige Lösung zur Verbesserung der akustischen Leistung von Wandkonstruktionen. Diese schalldämpfende Unterlage besteht zu 50 % aus recycelten Kunstfasern und verleiht Wandsystemen mehr Dichte und akustische Masse. Sie trägt zur Reduzierung der Luftschallübertragung bei und bleibt gleichzeitig hinter der Oberfläche verborgen.

Acousti-Board Ultra™ ist leicht, einfach zu verlegen und lässt sich vor der Trockenbauwandmontage mit Ziernägeln direkt auf die Trägerplatten aufbringen. Es ist die ideale Wahl für Projekte, die eine unauffällige Schallschutzschicht mit Nachhaltigkeitsanspruch erfordern.

Hauptvorteile:

  • Trägt zu umweltfreundlicheren Baupraktiken bei
  • Verbessert die STC-Leistung von Wandbaugruppen
  • Wirtschaftlich und effizient
  • Heftbare Oberfläche für zusätzliche Funktionalität bei Verwendung hinter gespanntem Stoff als Wandpaneel oder Hefttafel
  • Einfache Montage mit handelsüblichem Werkzeug

Erzielen Sie eine bessere Akustik und erfüllen Sie Umweltziele – ohne Kompromisse bei der Designabsicht einzugehen.

Spezifikation
  • SECTION 09 84 33

    Acousti-Board Ultra Soundproofing Backer Wall Panels

    PART 1 GENERAL

    1. SECTION INCLUDES
      1. Acousti-Board Ultra soundproofing backer wall panels.
    2. REFERENCES
      1. American Society for Testing and Materials (ASTM)
        1. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
        2. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.
        3. ASTM E90: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.
        4. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests
      2. International Code Council (ICC)
        1. ICC IBC: International Building Code
    3. SUBMITTALS
      1. Product Data: Manufacturer’s data sheet and installation instructions.
      2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.
      3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
    4. MAINTENANCE MATERIAL
    5. Extra Materials:
      1. Deliver no less than two percent (2%) / (Other) of each type, color and pattern of material.
      2. Extra materials shall be from the same production run as the original materials.
      3. Extra materials shall remain in the manufacturer’s original packaging and given to the building owner upon substantial completion of the work. Store extra materials per instructions as described in storage and handling requirements.
    6. QUALITY ASSURANCE
      1. Qualifications:
        1. Manufacturers: Provide acoustical wall panels from a single manufacturer.
        2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
      2. Performance Requirements:
        1. Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.
        2. Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423 and ASTM E90.
    7. DELIVERY, STORAGE, AND HANDLING
      1. Storage and Handling Requirements:
        1. Handle panels carefully to avoid any damage.
        2. Store panels indoors in a clean, cool, dry place, and out of direct sunlight.
        3. Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
    8. SITE CONDITIONS
      1. Ambient Conditions:
        1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
        2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
      2. Existing Conditions: Do not install wall panels until space is enclosed and weather proofed, and wet work is completely dry.
    9. WARRANTY
      1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

    PART 2 PRODUCTS

    (Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Acousti-Board Ultra information can be found on our website

    1. MANUFACTURERS
      1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
        Phone: 952-448-5300. Fax: 952-448-2613. Website:
    2. DESCRIPTION
      1. Product: Acousti-Board Ultra soundproofing backer wall panels by Acoustical Surfaces, Inc.
      2. Products Options:
        1. Panel Composition: 50% pre-consumer recycled synthetic fiber
        2. Panel Density: 13 lb pcf
        3. Panel Thickness: 1/2" ± 1/16”
        4. Panel Size: (2’ x 4’) / (4’ x 8’)
        5. Edge Detail: Square
        6. Mounting Method: (Adhesive) / (Mechanical Fastener)
      3. Product Performance:
        1. Acoustical Performance
          1. Noise Reduction Coefficient (NRC) per ASTM C423 – 0.50
          2. Sound Transmission Class (STC) per ASTM E90 – 15
        2. Surface Burning Performance
          1. Fire Rating per ASTM E84: Class A.

    PART 3 EXECUTION

    1. EXAMINATION
      1. Verification of Conditions:
        1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.
        2. All wet work in the installation area must be complete, cured, and dry prior to installation.
        3. Wall assembly shall be complete, inspected, and accepted before wall work begins.
    2. INSTALLATION
    3. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
    4. CLEANING
    5. Clean surfaces of wall panels per manufacturer’s instructions or recommendations.
    6. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
    7. PROTECTION
    8. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

    END OF SECTION

Technische Spezifikation
  • Referenznummeracoustical-surfaces-acousti-board
  • ProduktfamilieSoundproofing Backer Board
  • ProduktgruppeSoundproofing Products
  • TypObjekt (Einzelobjekt)
  • Veröffentlichungsdatum2011-04-21
  • Editionsnummer1
  • Höhe (Inches)96
  • Breite (Inches)48
  • Tiefe (Inches)0.5
Verwandt
  • HauptmaterialZellulose
  • Entwickelt inUSA
  • Hergestellt inUSA
  • Nettogewicht (lbs)20
Klassifikation
  • BIMobject KategorieBaumaterialien - Akustikwände und -Zubehör
  • IFCClassificationWand
  • ETIM CodeEG000006
  • ETIM NameInstallation ducts for wall and ceiling
  • Classifications.Uniclass2015CodeAc_40_65_79
  • Classifications.Uniclass2015BeschreibungSound controlling
  • Klassifizierung09 81 13
  • Format2014TitelAcoustic Board Insulation
  • OmniClassNummer23-15 13 19 35
  • OmniClassTitelAcoustical Wall Treatment

Verfügbarkeit in den Regionen

Nordamerika
Anguilla
Antigua und Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Besondere Gemeinde
Britische Jungferninseln
Costa Rica
Curaçao
Dominica
Dominikanische Republik
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Jungferninseln
Kaimaninseln
Kanada
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Republik Trinidad und Tobago
Saint-Barthélemy
Sankt Kitts und Nevis
Sankt Lucia
Sankt Martin
Sankt Pierre und Miquelon
Sankt Vincent und die Grenadinen
Sint Maarten
Turks- und Caicosinseln
USA