Telescopic lip dock leveller 233NG

Platform and lip are made from high-quality durbar plate. Depending on the width, the dock leveller 233NG is strengthened with 6 or 8 profiles in the length. The rear of the top platform is connected to the lower frame by means of 14 laser-cut hinges. These hinges can easily withstand the applied forces. 

Standard safety provisions:

• Fully hydraulic safety stop;
• Emergency stop switch with reset facility;
• Non-retractable sliding toe guards;
• Sturdy steel supports for transverse movements (cross traffic);
• Black / yellow safety markings
• Non-removable safety strut;
• Motor safeguards by means of a thermal relay;
• Control panel instruction symbols.

Standards
The telescopic lip dock leveller 233NG has the CE-marking. All loading Systems dock levellers are in compliance with all safety aspects stipulated in the European Directive EN 1398.

Technical Specifications

• Standards CE-marking
• Loading capacity (EN 1398) 60 kN
• Construction height 700 mm (600 mm as an option)
• Sliding length 0 – 500 mm (till 1000 mm as an option)
• Lip angle (ca. 5°) 25 mm
• Motor 1,1 kW
• Power supply 400 V / 50 Hz / 2,5 A
• Control current 24 V DC
• Protection class IP 54
• Working pressure ca. 100 bar
• Outside diameter main cylinder 65 mm
• Outside diameter lip cylinder 50 mm
• Operating temperature -30° till +50° Celsius
• Standard colour RAL 9005 (black)

No rights may be derived from the BIM models.