Swing lip dock leveller 232NG

Platform and lip are made from high-quality Durbar plate. Depending on the width, the dock leveller 232 60 kN is strengthened along its length by means of 10-12 set profiles. The rear of the top platform is connected to the lower frame by means of 14 laser-cut hinges. These hinges can easily withstand the applied forces. Similar pins are used for the lip hinge at the front of the platform top.

Standard safety provisions:

• Fully hydraulic safety stop by means of a pipe rupture valve built into the cylinder;
• Emergency stop switch with reset facility;
• Non-retractable sliding and fixed toe guards;
• Robust extra wide lip keepers for transverse movements (cross traffic)
• Black / yellow markings
• Motor safeguards by means of a thermal relay;
• Control panel instruction symbols.

Standards
The swing lip dock leveller 232 60kN has the CE-marking. All loading Systems dock levellers are in compliance with all safety aspects stipulated in the European Directive EN 1398.

Technical Specifications

• Standards CE-marking
• Loading capacity (EN 1398) 60kN
• Construction height 600 mm
• Lip length 400 mm (till 500 mm as an option)
• Lip angle (ca. 4°) 45 mm
• Motor 0,75 kW
• Power supply 3 phase, neutral and earth / 400 V
• Control current 24 V DC
• Protection class IP 54
• Working pressure ca. 100 bar
• Outside diameter main cylinder 65 mm
• Outside diameter lip cylinder 45 mm
• Operating temperature -30° till +50° Celsius
• Standard colour RAL 9005 (black)

No rights may be derived from the BIM models.