Veröffentlichen Sie Ihre Produkte
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra
Drehflügeltürantrieb ASSA ABLOY SW200 Integra

    Drehflügeltürantrieb ASSA ABLOY SW200 Integra

    3.8 von 5 Sternen3.8(6 Bewertungen)
    Das ASSA ABLOY SW100 Integra Komplett-Pendeltürsystem ist die perfekte Wahl, wenn hohe Leistung und höchste Sicherheit besonders wichtig sind. Energieeffizienz Die automatischen Türsysteme von ASSA ABLOY ENTRANCE SYSTEMS sind von Natur aus nachhaltig und bieten automatisch Komfort, da sie nur bei Bedarf öffnen. Dadurch wird unnötiger Lufteintritt vermieden und die Klimazonen getrennt. Die innovative Elektronik des ASSA ABLOY SW200 I (Integra) Komplett-Pendeltürsystems sorgt für minimalen Energieverbrauch und optimale Türleistung. Sicherheit Das ASSA ABLOY SW200 Integra ist für alle sicher zu bedienen, unabhängig von Alter und körperlicher Verfassung. Im Falle einer Behinderung durch eine Person oder einen Gegenstand sorgt die Hinderniserkennung für einen Stopp und einen Rücklauf. Das abgerundete Profil an der Hinterkante bietet Schutz vor Fingerklemmung. Darüber hinaus entspricht das System vollständig den europäischen Normen. Komfort Ein Eingang mit einem ASSA ABLOY SW200 I (Integra) Drehtürsystem ist dank der optionalen Batterie-Notstromversorgung immer zugänglich. Das System überwacht außerdem die Batterieleistung und -funktion und meldet elektronisch, wenn sie nicht ordnungsgemäß funktioniert und ausgetauscht werden muss. Der Antrieb ist bei allen Wetterbedingungen zuverlässig, da er beim Öffnen und Schließen nicht von Kamindruck und Windlast beeinflusst wird. Für Komfort, Sicherheit und ein schnelles Verlassen des Hauses lässt sich das System bei Bedarf problemlos manuell öffnen. Die Sensorerkennung gewährleistet trotz des erhöhten Schließmoments minimale manuelle Öffnungskräfte. Der ASSA ABLOY SW200 Integra wird als komplettes, einbaufertiges Türsystem geliefert und ermöglicht eine schnelle und reibungslose Inbetriebnahme. Sicherheit Die intelligenten Verriegelungsfunktionen des ASSA ABLOY SW200 Integra sorgen für Ihre Sicherheit. So werden beispielsweise Doppeltüren präzise gesteuert, um ein Verklemmen zu verhindern und die Sicherheit zu erhöhen. Das System erkennt auch, wenn die Tür nicht vollständig geschlossen ist, und veranlasst ein erneutes Öffnen und Schließen der Tür, selbst bei starker Wind- und Kaminlast. Ästhetik Das ASSA ABLOY SW200 Integra ist ein komplettes Drehtürsystem mit ästhetischer Optik, da die Antriebseinheit direkt an der Oberseite der Tür befestigt ist und kein Armsystem aufweist.
    Spezifikation
    • L20 DOORS/SHUTTERS/HATCHES

      490 AUTOMATIC DOORS:

      Manufacturer:

      ASSA ABLOY Entrance Systems AB

      Lodjursgatan 10

      261 22 Landskrona, Sweden

      Model Double Door Leaves:

      ASSA ABLOY SW200i-2 Integra – an aesthetically pleasing, anti-ligature, digitally controlled and intelligent complete swing door system. Includes built-in anti-finger trap door leaves mounted into a tight sealed frame. Complete with an overhead concealed swing door operator and ball-raced heavy duty bottom pivot. Specifically designed to give control in the windiest of locations. Providing integrated access control and locking features. Door automatically opens inwards or outwards and can also be opened manually with a maximum of 22N opening force. Developed to comply with European standards and requirements for low and high-energy power operated doors, consuming just 300 watts of power per activation with battery backup facility delivering up to 300 activations where required. Tested to 1m cycles and on door weights in excess of up to 320Kg.

      Dimensions:

      Frame Height (FH): Range 2100 to 2600mm

      Frame Width (FW): Range 1250mm to 2500mm

      Clear Opening Width (COW): FW less 121mm

      Clear Opening Height (COH): FH – 164mm

      Top door rail: 96mm/174mm

      Bottom door rail: 100mm/176mm

      Midrail type: 70mm or 150mm or NONE

      Midrail Height (MH): XXXXmm from FFL.

      Low Energy or High Energy Configuration: Low / High

      Standard equipment:

      - Stack Pressure Compensation: operator counteracts to positive stack pressures, negative stack pressures and sudden changes of stack pressures to maintain consistent door speeds.

      - Intelligent Trajectory Control: operator knows where the door should be at all times and adjusts torque accordingly.

      - Dynamic braking helps cushion the door during opening to prevent going past 90 degrees, or during closing to prevent slamming.

      - Extended Closing Torque (ECT): provides extra torque in the last 10 degrees of closing to close and latch the door. Speed remains constant so the door stays within the standards.

      - Latch Retry: if the door does not latch when closing, the SW200i INTEGRA will detect this condition and immediately open the door to 10 degrees and execute two attempts to latch the door.

      - Wind Force Dampening: operator mechanically counteracts to wind forces, slowing down the opening or closing of the door.

      - Electric Lock monitoring and door leaf sequenced operation between operators for pairs of doors allowing lock release and rebate coordination.

      - Full power assist functionality for manually opening doors with a force below 22N.

      - Programme selector: Cover with PS-3B integrated programme selector (High level) / Low level PS-4C Flush Mounted / Low level PS-4C Surface Mounted

      - Frame and Cover finish: SAA / ASSA ABLOY powdercoat finish RAL ref: To be confirmed

      - Glass type: 6mm Laminated / 8mm Laminated / 10mm Laminated / 22mm Insulated (Double Glazed Unit) / 40mm Insulated (Double Glazed Unit)

      - Ramped threshold: Yes / No

      - Door Direction: Inswing / Outswing

      - Handle: Yes / No

      Activation and control system:

      - Electronic control unit with plug-in connections and power supply.

      - SA51 Uni-directional combined motion sensing radar entry & exit activation.

      Additional Options:

      - Weather protection cap for external activator.

      - Concealed radar fitting, white for ceiling mounting of SA51 activator.

      - Battery Back-up providing up to 300 activations.

      Safety device (s):

      - SP33-M active infrared presence sensor, monitored in line with EN16005:2012. Sends out an infrared curtain so that the door does not open or close against pedestrian traffic. To EN16005:2012 for doors in high risk areas. Suitable for door leaf(s) upto 1200mm wide.

      - Safety Barrier – where applicable to prevent cross traffic and body traps.

      Locking mechanism:

      - Electric Strike Release: YES or NO

      - Mechanical hook bolt lock: One Euro Lock / Two Euro Locks / One ASSA Lock / Two ASSA Locks

      - Cylinder type: Keyed Both Sides / Key with Thumbturn

      - Flush Bolts to slave leaf: Yes / No

      Model One Door leaf:

      ASSA ABLOY SW200i-1 Integra – an aesthetically pleasing, anti-ligature, digitally controlled and intelligent complete swing door system. Includes built-in anti-finger trap door leaf mounted into a tight sealed frame. Complete with an overhead concealed swing door operator and ball-raced heavy duty bottom pivot. Specifically designed to give control in the windiest of locations. Providing integrated access control and locking features. Door automatically opens inwards or outwards and can also be opened manually with a maximum of 22N opening force. Developed to comply with European standards and requirements for low and high-energy power operated doors, consuming just 300 watts of power per activation with battery backup facility delivering up to 300 activations where required. Tested to 1m cycles and on door weights in excess of up to 320Kg.

      Dimensions:

      Frame Height (FH): Range 2100 to 2600mm

      Frame Width (FW): Range 1250mm to 2500mm

      Clear Opening Width (COW): FW less 121mm

      Clear Opening Height (COH): FH – 164mm

      Top door rail: 96mm/174mm

      Bottom door rail: 100mm/176mm

      Midrail type: 70mm or 150mm or NONE

      Midrail Height (MH): XXXXmm from FFL.

      Low Energy or High Energy Configuration: Low / High

      Standard equipment:

      - Stack Pressure Compensation: operator counteracts to positive stack pressures, negative stack pressures and sudden changes of stack pressures to maintain consistent door speeds.

      - Intelligent Trajectory Control: operator knows where the door should be at all times and adjusts torque accordingly.

      - Dynamic braking helps cushion the door during opening to prevent going past 90 degrees, or during closing to prevent slamming.

      - Extended Closing Torque (ECT): provides extra torque in the last 10 degrees of closing to close and latch the door. Speed remains constant so the door stays within the standards.

      - Latch Retry: if the door does not latch when closing, the SW200i INTEGRA will detect this condition and immediately open the door to 10 degrees and execute two attempts to latch the door.

      - Wind Force Dampening: operator mechanically counteracts to wind forces, slowing down the opening or closing of the door.

      - Electric Lock monitoring and door leaf sequenced operation between operators for pairs of doors allowing lock release and rebate coordination.

      - Full power assist functionality for manually opening doors with a force below 22N.

      - Programme selector: Cover with PS-3B integrated programme selector (High level) / Low level PS-4C Flush Mounted / Low level PS-4C Surface Mounted

      - Frame and Cover finish: SAA / ASSA ABLOY powdercoat finish RAL ref: To be confirmed

      - Glass type: 6mm Laminated / 8mm Laminated / 10mm Laminated / 22mm Insulated (Double Glazed Unit) / 40mm Insulated (Double Glazed Unit)

      - Ramped threshold: Yes / No

      - Door Direction: Inswing / Outswing

      - Door Handing: Left / Right

      - Handle: Yes / No

      Activation and control system:

      - Electronic control unit with plug-in connections and power supply.

      - SA51 Uni-directional combined motion sensing radar entry & exit activation.

      Additional Options:

      - Weather protection cap for external activator.

      - Concealed radar fitting, white for ceiling mounting of SA51 activator.

      - Battery Back-up providing up to 300 activations.

      Safety device (s):

      - SP33-M active infrared presence sensor, monitored in line with EN16005:2012. Sends out an infrared curtain so that the door does not open or close against pedestrian traffic. To EN16005:2012 for doors in high risk areas. Suitable for door leaf(s) upto 1200mm wide.

      - Safety Barrier – where applicable to prevent cross traffic and body traps.

      Locking mechanism:

      - Electric Strike Release with Latch Lock: YES or NO

      - Mechanical hook bolt lock: One Euro Lock / Two Euro Locks / One ASSA Lock / Two ASSA Locks

      - Cylinder type: Keyed Both Sides / Key with Thumbturn

      Warranty:

      1 YEAR / 2 YEAR / 3 YEAR / 4 YEAR / 5 YEAR extended manufacturer’s warranty available to secure optimum performance and longevity.

      Please consult ASSA ABLOY Entrance Systems Limited technical literature for further details and the quotation for project specific notes.

      Please consult ASSA ABLOY Entrance Systems Limited technical literature for further details and the quotation for project specific notes.

    Technische Spezifikation
    • ReferenznummerSW200_I
    • ProduktfamilieAutomatic Swing Doors
    • Produktgruppeby ASSA ABLOY
    • TypBaugruppe (mehrere Objekte)
    • Veröffentlichungsdatum2017-08-29
    • Editionsnummer1
    • Höhe (mm)2600
    • Breite (mm)2500
    • Tiefe (mm)160
    Verwandt
    • HauptmaterialAluminium
    • Sekundär MaterialGlas
    • Entwickelt inSchweden
    • Hergestellt inTschechische Republik
    • Nettogewicht (kg)150
    Klassifikation
    • BIMobject KategorieTüren - Innen- und Außentüren
    • IFCClassificationTür
    • UNSPSCNameAutomatic doors
    • UNSPSCCode30171510
    • Classifications.Uniclass2015CodeAc_15_50_25
    • Classifications.Uniclass2015BeschreibungDoors, windows and glazing surveying
    • OmniClassNummer23-17 11 00
    • OmniClassTitelDoors
    • CSIUniFormatIICodeB2030
    • CSIUniFormatIITitleExterior Doors

    Verfügbarkeit in den Regionen

    Europa Asien Afrika Südamerika Ozeanien
    Åland
    Afghanistan
    Ägypten
    Argentinien
    Amerikanisch-Samoa
    Albanien
    Armenien
    Algerien
    Bolivien
    Australien
    Andorra
    Aserbaidschan
    Angola
    Brasilien
    Cookinseln
    Belgien
    Bahrain
    Äquatorialguinea
    Chile
    Fidschi
    Bosnien und Herzegowina
    Bangladesch
    Äthiopien
    Ecuador
    Föderierte Staaten von Mikronesien
    Bulgarien
    Bhutan
    Benin
    Falklandinseln (Malvinen)
    Französisch-Polynesien
    Dänemark
    Britisches Territorium im Indischen Ozean
    Botsuana
    Französisch-Guyana
    Guam
    Deutschland
    Brunei Darussalam
    Burkina Faso
    Guyana
    Kiribati
    Estland
    China
    Burundi
    Kolumbien
    Kleinere Inselbesitzungen der Vereinigten Staaten
    Färöer
    Georgien
    Demokratische Republik Kongo
    Paraguay
    Marshallinseln
    Finnland
    Hongkong
    Dschibuti
    Peru
    Nauru
    Frankreich
    Indien
    Elfenbeinküste
    Suriname
    Neukaledonien
    Gibraltar
    Indonesien
    Eritrea
    Uruguay
    Neuseeland
    Griechenland
    Irak
    Gabun
    Venezuela
    Niue
    Guernsey
    Iran
    Gambia
    Nördliche Marianen
    Irland
    Israel
    Ghana
    Norfolkinsel
    Island
    Japan
    Guinea
    Osttimor
    Isle of Man
    Jemen
    Guinea-Bissau
    Palau
    Italien
    Jordanien
    Kamerun
    Papua-Neuguinea
    Jersey
    Kambodscha
    Kap Verde
    Pitcairninseln
    Kroatien
    Kasachstan
    Kenia
    Salomonen
    Lettland
    Katar
    Komoren
    Samoa
    Liechtenstein
    Kirgisistan
    Kongo
    Tokelau
    Litauen
    Kokosinsel (Keeling)
    Lesotho
    Tonga
    Luxemburg
    Kuwait
    Liberia
    Tuvalu
    Malta
    Laos
    Libyen
    Vanuatu
    Moldawien
    Libanon
    Madagaskar
    Wallis und Futuna
    Monaco
    Macao
    Malawi
    Montenegro
    Malaysia
    Mali
    Niederlande
    Malediven
    Marokko
    Nordmazedonien
    Mongolei
    Mauretanien
    Norwegen
    Myanmar (Birma)
    Mauritius
    Österreich
    Nepal
    Mayotte
    Polen
    Nordkorea
    Mosambik
    Portugal
    Oman
    Namibia
    Rumänien
    Pakistan
    Niger
    Russland
    Palästina
    Nigeria
    San Marino
    Philippinen
    Réunion
    Schweden
    Saudi-Arabien
    Ruanda
    Schweiz
    Singapur
    Sambia
    Serbien
    Sri Lanka
    Sankt Helena
    Slowakei
    Südkorea
    São Tomé und Príncipe
    Slowenien
    Syrien
    Senegal
    Spanien
    Tadschikistan
    Seychellen
    Svalbard und Jan Mayen
    Taiwan
    Sierra Leone
    Tschechische Republik
    Thailand
    Simbabwe
    Ukraine
    Türkei
    Somalia
    Ungarn
    Turkmenistan
    Südafrika
    Vatikanstadt
    Usbekistan
    Sudan
    Vereinigtes Königreich
    Vereinigte Arabische Emirate
    Südsudan
    Weißrussland
    Vietnam
    Swasiland
    Zypern
    Weihnachtsinsel
    Tansania
    Togo
    Tschad
    Tunesien
    Uganda
    Westsahara
    Zentralafrikanische Republik
    Common.Footer.ValueProp.Image.AltText

    Design App für Revit

    Laden Sie Familien mit einem Klick direkt in Ihr Revit-Modell

    Holen Sie sich einen Ort, um einfacher auf neue Objekte zuzugreifen, Ihre Revit-Familien zu speichern und mit Ihrem Team zusammenzuarbeiten.

    • HäkchenArbeiten Sie direkt mit BIM-Objekten neben Revit
    • Häkchen 2 GB Cloud-Speicher – speichern Sie Ihre Revit-Inhalte
    • Häkchen Holen Sie sich die verkörperte Kohlenstoff-LCA (A1-A3) direkt aus Revit