| Length of the loading platform: | 2000 mm 2500 mm 3000 mm 3500 mm 4000 mm 4500 mm |
| |
| |
| |
| |
| External width of the loading platform: | 3400 mm |
| |
| |
| |
| |
| Internal width of the loading platform: | 1750 mm 2000 mm 2250 mm |
| |
| |
| |
| |
| Height of the loading platform: | 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm |
| |
| |
| |
| |
| Load capacity: | 60 kN |
| |
| |
| |
| |
| Steel sheet thickness of the hinged part: | 6/8 mm |
| |
| |
| |
| |
| Setting angle measured to the building: | 45° 60° 90° 120° 135° |
| |
| |
| |
| |
| Protective coating: | The metal parts of the loading platform are treated by bead blasting and coated with 2-component enamel. Coating thickness: 80 microns |
| |
| |
| |
| |
| Standard colours: | RAL 9017 (black); RAL 7016 (anthracite grey); RAL 5002 (blue). |
| |
| |
| |
| |
| Constuction of loading platform: | Side sections, support beam, supports |
| |
| |
| |
| |
| Side sections of platform: | A welded frame made of 100 × 100 × 3 mm tubes with hot-rolled steel sheet with lenticular corrugation. Side section sheet is 6/8 mm thickness (without corrugation/with corrugation). For the side section to be more rigid the reinforcing plate 145×40×3 mm is used |
| |
| |
| |
| |
| Support beam of the platform: | It is made of HEB 120 I-section steel according to DIN 1025 |
| |
| |
| |
| |
| Supports of the platform: | The support is made of two tubes with different cross sections and has telescopic design which allows adjusting of the height of the platform during installation |
| |
| |
| |
| |
| Protection from precipitation and wind is provided: | Dock house (DH) |
| |
| |
| |
| |
| Standard dimensions of dock house:(width x height) | 3400 х 3400 mm |
| |
| |
| |
| |
| Setting angle measured to the building: | 45° 60° 90° 120° 135° |
| |
| |
| |
| |
| Construction of dock house: | It is a prefabricated metal structure: metallic frame, tension cables, framing profiles, water gutter, cladding (profile sheeting / profile sheeting + sandwich panel) |
| |
| |
| |
| |
| Frame of dock house: | Made of 60×60×2 mm tubes. The tubes are connected by galvanized brackets and self-tapping screw fixings. Perforations for fixing are made in the carcass during production |
| |
| |
| |
| |
| Options for cladding the dock house: | 1. Without cladding 2. Profile sheeting (24 colours) 3. Cladding with sandwich panels and profile sheeting (10 colours) |
| |
| |
| |
| |
| Protection against draught is assured: | Dock shelter (DSF) |
| |
| |
| |
| |
| Standard dimensions of the dock shelter (width х height х depth): | 3400 х 3400 х 600 mm |
| |
| |
| |
| |
| Construction of dock shelter: | Frame, connecting levers, front curtains, covering elements |
| |
| |
| |
| |
| Frame of dock shelter: | An assembly of front and back aluminium profiles with anodised coating that ensures high protection against corrosion |
| |
| |
| |
| |
| Connecting levers of dock shelter: | Hot-dip galvanised steel tube with protection coating. Number of levers—2 from each side of the dock shelter |
| |
| |
| |
| |
| Front curtains of dock shelter: | Top and side tents are made of 3 mm thick reinforced PVС |
| |
| |
| |
| |
| Covering elements of dock shelter: | Side and top coverings are made of 0.5 mm thick PVC with 630 g/m density |