Lumaris Power Interface

Power Interface

Regulatory Approvals

• cULus Listed for USA and Canada

• FCC Part 15

– Class A (277 V~)

– Class B (120 V~)

• Meets ANSI C62.41 category A surge protection

standards up to and including 4 kV

• Meets ULR 8750/CSA C22.2 No. 250.13-14,

“Light Emitting Diode (LED) Equipment For Use in

Lighting Products”

• Class 2 output; meets ULR 1310/CSA C22.2

No. 223-M91

Performance

• Operating Voltage: 120 V~/277 V~ 50/60 Hz

• Patented thermal fold back protection

• Typical standby power consumption:

0.25 W at 120 V~ and 0.4 W at 277 V~

• Open-circuit protected output

• Short-circuit and overload-protected output

• Output: 24 V- constant voltage at high-end

• Output Load Range: 2 W to 96 W at high-end

Features

• Powers up to three Lumaris controllers and 48 ft

(14.6 m) of Lumaris LED tape.

• Protected from input power miswires.

• 100% end-of-line performance tested at a

Lutron factory.

• RoHS compliant.

• Restores all settings after power failure.

• Barrier provided for Class 2 separation in the

wiring compartment.

• Redundant connections on line terminals for easy

daisy-chain wiring.

• Redundant connections on output terminals allow for

easy wiring of two LED tape home runs.

• Class 2 output designed to withstand hot swap.

• Provided with three barrel-to-terminal adapters.

Environmental

• Minimum Operating Ambient Temperature:

ta = 32 °F to 104 °F (0 °C to 40 °C)

• Relative humidity: 0% to 90% non-condensing

• Indoor use only