119 gallon storage tank

Google-Übersetzung,

Glasbeschichteter 119G-Lagertank für Wohn- und Gewerbezwecke

Spezifikation

Construction
The tank shall be manufactured from mild steel with
a baked on Cobalt enriched porcelain glass lining
Tank outer shell shall be steel with a baked on
powder coating for protection
The ECO-119GLBB Tank is only certified for Indoor
installation, it should not be located external to the building

Insulation
2" of High R value foam insulation will be sprayed on to the
bare shell of the tank to reduce heat loss

Connections
Connections to the Hot and Cold building supplies shall be
1 1/2" NPT Female type
Connections to the Hot and Cold piping to the Heat Pump
shall be 3/4" NPT Female type
Cold Water Piping from Storage Tank to Heat Pump
and return of Hot Water piping from Heat Pump to Tank
shall be 1/2" Copper or PEX.
2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
which shall be located at the base of the ECO-119GLBB
2 x Magnesium anode rods shall be installed internally

Controls
The tank shall be supplied with a Temperature sensor
installed in a sensor well to control the GS5-45HPC & -D
Additional GS Heat Pumps connected to a tank shall
require an individual Temperature sensor
Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
Two additional Thermowells are supplied with the Tank at
the Top and Bottom levels of the Tank so that a Controller
to provide Demand Response signals can be used

Pressure and Temperature Relief
Tank shall be supplied with a factory installed
ASME certified Pressure and Temperature Relief valve
Settings shall be at 150 Psig for Presssure and
210°F for Temperature

Technische Spezifikation

Referenznummer119-gallon-storage-tank
ProduktfamilieResidential Tanks
ProduktgruppeECO-119GLBB
TypObjekt (Einzelobjekt)
Veröffentlichungsdatum2025-09-05
Editionsnummer1
Höhe (Inches)63.57
Breite (Inches)28
Tiefe (Inches)28

Links

Produkt urlhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Installationinstruktionenhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
ProductCertificationhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Technische Beschreibunghttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf

Verwandt

HauptmaterialC-Stahl
Sekundär MaterialGlasgranulat
Entwickelt inUSA
Hergestellt inUSA
Nettogewicht (lbs)345

Klassifikation

BIMobject KategorieHLK - Technik - Warmwasserbereiter
IFCClassificationElektroheizung
ETIM-CodeEG000043
ETIM-NameResidential heating
Classifications.Uniclass2015CodePr_60_60_96
Classifications.Uniclass2015BeschreibungWater heaters
Klassifizierung22 33 36.16
Format2014TitelCommercial Storage Electric Domestic Water Heaters
OmniClassNummer23-31 29 00
OmniClassTitelHot Water Heaters

Verfügbarkeit in den Regionen

Nordamerika
Anguilla
Antigua und Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Besondere Gemeinde
Britische Jungferninseln
Costa Rica
Curaçao
Dominica
Dominikanische Republik
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Jungferninseln
Kaimaninseln
Kanada
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Republik Trinidad und Tobago
Saint-Barthélemy
Sankt Kitts und Nevis
Sankt Lucia
Sankt Martin
Sankt Pierre und Miquelon
Sankt Vincent und die Grenadinen
Sint Maarten
Turks- und Caicosinseln
USA