ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
    Zurn

    ZF1201-U( )4-F_ One-Piece Faceplate Carrier System

    EZCarry® one-piece combination floor mounted foot/faceplate horizontal siphon jet system supplied for ( ) rough-in height features high performance Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep, 3” [76mm] no-hub connections, and extended 2” [51mm] vent. Faceplate enables prefabrication with strut channel or angle iron. Corrosion resistant adjustable 3” [76mm] diameter x 6” [152mm] coupling with integral test cap is designed to increase flow velocity and line carry. Labor saving Neo-Seal bonded gasket optimizes flow performace while reducing installation steps. Complete system includes one-piece combination foot/faceplate, heavy-duty 1/2” [13mm] rear anchor tie down (optional dependent on installation method, see intallation instructions), fixture bolts, trim and stud protectors. EZCarry® one-piece combination floor mounted foot/faceplate system complies with all applicable requirements of ASME A112.6.1M up to a 500 lb maximum static load.

    Compliance:

    Massachusetts Approved, ASME, UPC, IPC, NPCC

    Features:

    • One-piece faceplate set to rough-in heights with no complicated vertical adjustments required
    • Provides top and bottom connection points for common prefabrication methods
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • 500 lb max static load per ASME 112.6.1M
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • EZCarry hydraulically optimized waterway and sweep propels waste further to virtually eliminate clogging and downtime

    Models Available

    ZF1201-UL4-F55 / ZF1201-UL4-F75 | ZF1201-UR4-F55 / ZF1201-UR4-F75 | ZF1201-UD4-F75-A | ZF1201-UL4-F75-A-JC | ZF1201-UR4-F75-A-JC

    Keywords: strut channel, prefabrication, Water Closet Carrier System, CARRIER SYSTEM, prefabrication construction, EZCarry, FACEPLATE CARRIER SYSTEM, One-Piece Faceplate, carrier assemblies, ONE PIECE FACEPLATE, Flexible Prefabrication, vertical adjustments, ONE PIECE footplate

    Teknisk specifikation
    • Unik ref.ZF1201-U
    • ProduktfamilieCarriers & Fixture Supports
    • ProduktgruppeWater Closet & Toilet Carriers
    • TypeObjekt (enkelt objekt)
    • Udgivelsesdato2023-05-22
    • Udgavenummer3
    • Højde (tommer)5.5
    • Bredde (tommer)18
    • Dybde (tommer)17
    Relateret
    • Materiale primærtCast iron
    • Materiale sekundærtABS
    • Designet iUSA
    • Nettovægt (lbs)68
    Klassifikation
    • BIMobject-kategoriVVS - Afløb
    • IFC-klassifikationSanitetsanordning
    • ETIM-kodeEC011338
    • ETIM-navnAccessories for double wall/built-in element sanitary
    • Uniclass 2015-kodePr_20_85_09_96
    • Uniclass 2015-beskrivelseWall-hung WC support brackets
    • CSI MasterFormat 2014-kode22 42 13.13
    • CSI MasterFormat 2014-titelCommercial Water Closets
    • OmniClass-nummer23-31 19 19
    • OmniClass-betegnelseWater Closets 

    Tilgængelighed i region

    Nordamerika
    Anguilla
    Antigua og Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Caribbean Netherlands
    Caymanøerne
    Costa Rica
    Cuba
    Curaçao
    De britiske jomfruøer
    Dominica
    Dominikanske Republik
    El Salvador
    Grenada
    Grønland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Jomfruøerne
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts og Nevis
    Saint Lucia
    Saint Pierre og Miquelon
    Saint Vincent og Grenadinerne
    Saint-Barthélemy
    Saint-Martin
    Sint Maarten
    Trinidad og Tobago
    Turks- og Caicosøerne
    USA