119 gallon storage tank
119 gallon storage tank

    119 gallon storage tank

    Residential / commercial glass-lined 119G storage tank

    Specifikation
    • Construction
      The tank shall be manufactured from mild steel with
      a baked on Cobalt enriched porcelain glass lining
      Tank outer shell shall be steel with a baked on
      powder coating for protection
      The ECO-119GLBB Tank is only certified for Indoor
      installation, it should not be located external to the building
      Insulation
      2" of High R value foam insulation will be sprayed on to the
      bare shell of the tank to reduce heat loss
      Connections
      Connections to the Hot and Cold building supplies shall be
      1 1/2" NPT Female type
      Connections to the Hot and Cold piping to the Heat Pump
      shall be 3/4" NPT Female type
      Cold Water Piping from Storage Tank to Heat Pump
      and return of Hot Water piping from Heat Pump to Tank
      shall be 1/2" Copper or PEX.
      2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
      which shall be located at the base of the ECO-119GLBB
      2 x Magnesium anode rods shall be installed internally
      Controls
      The tank shall be supplied with a Temperature sensor
      installed in a sensor well to control the GS5-45HPC & -D
      Additional GS Heat Pumps connected to a tank shall
      require an individual Temperature sensor
      Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
      Two additional Thermowells are supplied with the Tank at
      the Top and Bottom levels of the Tank so that a Controller
      to provide Demand Response signals can be used
      Pressure and Temperature Relief
      Tank shall be supplied with a factory installed
      ASME certified Pressure and Temperature Relief valve
      Settings shall be at 150 Psig for Presssure and
      210°F for Temperature


    Teknisk specifikation
    • Unik ref.119-gallon-storage-tank
    • ProduktfamilieResidential Tanks
    • ProduktgruppeECO-119GLBB
    • TypeObjekt (enkelt objekt)
    • Udgivelsesdato2025-09-05
    • Udgavenummer1
    • Højde (tommer)63.57
    • Bredde (tommer)28
    • Dybde (tommer)28
    Relateret
    • Materiale primærtKulstofstål
    • Materiale sekundærtGlasgranulat
    • Designet iUSA
    • Fremstillet iUSA
    • Nettovægt (lbs)345
    Klassifikation
    • BIMobject-kategoriHVAC - Vandvarmere
    • IFC-klassifikationElektrisk varmer
    • ETIM-kodeEG000043
    • ETIM-navnResidential heating
    • Uniclass 2015-kodePr_60_60_96
    • Uniclass 2015-beskrivelseWater heaters
    • CSI MasterFormat 2014-kode22 33 36.16
    • CSI MasterFormat 2014-titelCommercial Storage Electric Domestic Water Heaters
    • OmniClass-nummer23-31 29 00
    • OmniClass-betegnelseHot Water Heaters

    Tilgængelighed i region

    Nordamerika
    Anguilla
    Antigua og Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Canada
    Caribbean Netherlands
    Caymanøerne
    Costa Rica
    Cuba
    Curaçao
    De britiske jomfruøer
    Dominica
    Dominikanske Republik
    El Salvador
    Grenada
    Grønland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Jomfruøerne
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts og Nevis
    Saint Lucia
    Saint Pierre og Miquelon
    Saint Vincent og Grenadinerne
    Saint-Barthélemy
    Saint-Martin
    Sint Maarten
    Trinidad og Tobago
    Turks- og Caicosøerne
    USA
    Common.Footer.ValueProp.Image.AltText

    Design App til Revit

    Indlæs familier direkte ind i din Revit-model med ét klik

    Få et sted til at få adgang til nye objekter nemmere, opbevar dine Revit-familier og samarbejd med dit team.

    • MarkeringArbejd direkte med BIM-objekter ved siden af Revit
    • Markering 2 GB cloudlager – gem dit Revit-indhold
    • Markering Få integreret CO2-LCA (A1-A3) direkte fra Revit